-
Short Lead Time for China Expandable Polyethylene EPE Foam Package Sheet EPE Foam Padding
Lowcell T is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density 0.45-0.5g/cm3 and thickness is 1mm. At the same time, our boards also have different thicknesses of 1-10mm to choose from. It is the best choice of inner core material for the new 5g communication radome to reduce weight and cost. While reducing the weight of radome and material and transportation cost, polypropylene has its own low dielectric constant and does not affect the transmission of communication signal.
-
Low MOQ for China Sheets to Sheets PE EPE XPE EPP EPS Foam Hot Air Lamination Machine Planks Hot Air Welder Machine
Lowcell U is a supercritical non crosslinked extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density is 0.45-0.5g/cm3, thickness is 7mm. In view of its light weight, excellent bending modulus and impact strength, as well as the low dielectric constant of polypropylene, which does not affect the signal transmission, it can be used as the core material of radome.
-
100% Original Factory China PP Foam Extrusion Line with Supercritical CO2, Environment-Friendly, Safety, Economical, Microcellular and High Performance
Lowcell H is a supercritical SCF non-crosslinked extruded foamed polypropylene(PP) or Polyethylene(PE) board with independent bubble structure.1.3 times foaming rate, density is 0.6-0.67g/cm3. It is made by CO extrusion and has a special three-layer structure. The upper and lower surface layers are blue or green solid polypropylene(PP) or Polyethylene(PE), and the surface pressed leather lines have the effect of skid resistance. The middle layer is black low expanded foam, it not only has good cushioning and protection during impact, but also has high hardness and compressive performance.
-
2019 Good Quality China Custom Printed Cardboard Paper Jelly Packing Packaging Box for Jelly Manufacturer Supplier Factory
LOWCELL polypropylene(PP) foam sheet is Carbon dioxide（CO2） SCF non-crosslinked with closed cell foam extrusion.This is better multi-purpose materials. The foam sheet is lighter, higher strength, fully recyclable,smooth surface and low VOC. Mostly use polypropylene(PP)foam sheet(expanded 3 times) as packaging inner material.The product lineup offers greater benefits by using the general-, antistatic- and conductive-grade products according to the usage environment.According to your needs, we can customize any shape of partition materials.Colors can also be customized.
-
PriceList for China Plastic PP PE PC Hollow Sheet/Grid/Plate/Board/Extrusion Line Machine
Lowcell H is a carbon dioxide non-crosslinked extruded foamed polypropylene or polyethylene board with closed cell bubble structure.1.3 times of foaming ratio, density 0.6-0.67g/cm3, thickness 2-3mm. It is made by coextrusion in the cavity of the machine die head and has a three-layer structure. The upper and lower surface layers are blue or green solid polypropylene(PP) or Polyethylene(PE), and the surface is pressed with leather lines, which has the effect of anti-skid.. The middle layer is black low expanded foam, It not only has good cushioning and protection during impact, but also has high hardness and compressive performance.
-
Lowest Price for China PP Film Production Line Polypropylene Sheets Extrusion Line
Lowcell is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure.The foaming rate is 3 times, and density is 0.4-0.45g/cm3.The thickness specification 3-5mm, different thickness for selection. Compared with the traditional solid polyethylene blister tray, it has many obvious advantages.
-
Low price for China High Static Pressure Ceiling Concealed Duct Fan Coil Unit
Lowcell U is a supercritical non crosslinked extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density is 0.45-0.5g/cm3, thickness is 7mm. In view of its light weight, excellent bending modulus and impact strength, as well as the low dielectric constant of polypropylene, which does not affect the signal transmission, it can be used as the core material of radome.
-
Renewable Design for China Exterior Wall Polystyrene Foam Core Material EPS Insulation Board of Sandwich Panel Foam Board
Material boxes are commonly used in factories.Mostly use polypropylene(PP)foam sheet(expanded 2 times) as Material box. Harder than 3 times foamed board.Because the sheet is closed cell foam extrusion,so it is not easy to accumulate ash.The material box made of polypropylene(PP) foam sheet will be lighter.This is its advantage.The connecting fastener used in the material box was designed by our company.At present, the fastener is more suitable for board with a thickness of 4-5mm, the most used thickness for making material boxes.Our polypropylene(PP) foam sheet can make many kinds of boxes.
-
Factory directly China Polyolefin Foam Insulation Expanded Crosslinked PP Foam Sheet
Lowcell T is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density 0.45-0.5g/cm3 and thickness is 1mm. At the same time, our boards also have different thicknesses of 1-10mm to choose from. It is the best choice of inner core material for the new 5g communication radome to reduce weight and cost. While reducing the weight of radome and material and transportation cost, polypropylene has its own low dielectric constant and does not affect the transmission of communication signal.
-
OEM China China Light Yellow Liquid C3h8n2o Inov Bucket 200kg Plastic PU Sheet
Lowcell is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure.The foaming rate is 3 times, and density is 0.4-0.45g/cm3.The thickness specification 3-5mm, different thickness for selection. Compared with the traditional solid polyethylene blister tray, it has many obvious advantages.
-
Professional Factory for China Wholesale Non -Toxic PP Plastic Solid Polypropylene PP Sheet Plastic
Lowcell is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 3 times, the density is 0.35-0.45g/cm3, and the thickness specification varies from 3mm、 5mm and 10mm according to the application occasion. It can be used as the core material and surface protective backing board of multi-layer composite buffer material for high demand packaging pallets of liquid crystal glass semi-finished products and finished products.
-
Professional Factory for China PP / Polypropylene Fibre
Lowcell U is a supercritical non crosslinked extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density is 0.45-0.5g/cm3, thickness is 7mm. In view of its light weight, excellent bending modulus and impact strength, as well as the low dielectric constant of polypropylene, which does not affect the signal transmission, it can be used as the core material of radome.
