-
LOWCELL 3 times polypropylene(PP) foam board filter machine splint disc 2mm/2.5mm
Lowcell is a supercritical non-crosslinked continuously extruded foamed polypropylene board with a closed-cell independent cell structure. The foaming ratio is 3 times, the density is 0.35-0.45g/cm3, and different thicknesses of 2-5mm are available according to the use occasion. Because of its excellent waterproof, mildew-proof, corrosion resistance and easy cleaning, its service life can reach at least 3 years. This PP foam plate filter splint disc is designed to meet the requirements of environments with high filtration requirements. It is made of PP foam board material, which can ensure that the product will not shed debris during use, thereby avoiding contamination of the product. This lightweight material makes the plywood more convenient to carry and install, improving the convenience of use of the product. In addition to being lightweight, non-shedding, and impact-resistant, this plywood disc is also non-toxic and harmless. After multiple tests, it has been confirmed that it will not cause any harm to the environment and the human body. It is a very Safe material. When you use this product, you don’t have to worry about negative impacts on the environment and the product itself, and you can use it with confidence
-
LOWCELL O polyethylene(PE)foam board 5mm/7mm/10mm/12mm
Lowcell O is a supercritical non crosslinking extruded foamed high-density polyethylene sheet with independent bubble structure. The foaming ratio is 2 times, the density is 0.45-0.55g/cm3, and the thickness is 5mm/7mm/10mm/12mm. It is a polyolefin foaming material with nearly perfect performance. Compared with polypropylene sheet with the same foaming ratio, foamed high-density polyethylene has higher strength and hardness, which makes it have better rigidity and compression resistance. At the same time, compared with other traditional materials, it also has a certain degree of lightweight and buffer protection. The higher density makes it have better nail-holding ability, and it will be more durable if screw connection processing is required. At the same time, compared with polypropylene, polyethylene has superior weather resistance and low temperature resistance, which is suitable for more extensive outdoor or low-temperature applications.
-
LOWCELL U polypropylene(PP) foam borad for radome
Lowcell U is a supercritical non crosslinked extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density is 0.45-0.5g/cm3, thickness is 7mm. In view of its light weight, excellent bending modulus and impact strength, as well as the low dielectric constant of polypropylene, which does not affect the signal transmission, it can be used as the core material of radome.
-
LOWCELL polypropylene(PP) foam board profile 5.0mm
Lowcell is a supercritical non-crosslinked continuous extruded foamed polypropylene sheet with closed-cell independent cell structure. 3 times the expansion ratio, the density is 0.35-0.45g/cm3, and the thickness specification varies from 3, 5, and 10mm according to the application occasion. It can be made into various turnover boxes and compartment materials, etc., and containers used for transportation and storage of products, etc. The production process of PP foam board is simple, and it can be cut into various shapes and sizes according to needs. This makes it very suitable for making the borders and inner partitions of turnover boxes, etc. Compared with traditional wood or metal materials, PP foam board is more durable and environmentally friendly. It is not easy to rust, rot or moisture, and can effectively resist the corrosion of chemicals. Not only is it able to withstand heavy loads and stacking pressure, but it also needs to protect the loaded items from bumps and damage. PP foam board also has good flame retardancy, which can effectively prevent the occurrence and spread of fire, which provides a higher safety guarantee for the use of turnover boxes. In order to meet these needs, PP foam sheets are widely used in various industries.
-
LOWCELL T polypropylene(PP) foam borad for 5G radome
Lowcell T is a supercritical non crosslinked continuous extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density 0.45-0.5g/cm3 and thickness is 1mm. At the same time, our boards also have different thicknesses of 1-10mm to choose from. It is the best choice of inner core material for the new 5g communication radome to reduce weight and cost. While reducing the weight of radome and material and transportation cost, polypropylene has its own low dielectric constant and does not affect the transmission of communication signal.
-
LOWCELL polypropylene(PP) foam board cover plate 10.0mm
Lowcell is a supercritical non-crosslinked extruded foamed polypropylene sheet with closed-cell independent cell structure. 2 times the expansion ratio, density 0.45-0.5g/cm3, thickness 10mm. It is an ultra-thick polypropylene foam board with near-perfect performance. Compared with polypropylene board with the same expansion ratio, foamed high-density polypropylene has higher strength and hardness, making it have better rigidity and compression resistance. We live in a dusty environment. Dust is everywhere and can accumulate inside the equipment, or in the turnover boxes of the parts production workshop, etc., negatively affecting its performance and lifespan. In order to solve this problem, we developed this 10mm PP foam board cover, which is a very simple and effective protection measure to isolate dust and dirt from the outside world. You can use our products with confidence.
-
LOWCELL H protective polypropylene(PP)foam sheet
Lowcell H is a supercritical SCF non-crosslinked extruded foamed polypropylene(PP) or Polyethylene(PE) board with independent bubble structure.1.3 times foaming rate, density is 0.6-0.67g/cm3. It is made by CO extrusion and has a special three-layer structure. The upper and lower surface layers are blue or green solid polypropylene(PP) or Polyethylene(PE), and the surface pressed leather lines have the effect of skid resistance. The middle layer is black low expanded foam, it not only has good cushioning and protection during impact, but also has high hardness and compressive performance.
-
LOWCELL Polyethylene HDPE foam board blister 3.0-5.0mm
Lowcell HDPE is a supercritical non-crosslinked extruded foamed high-density polyethylene sheet with independent cell structure. 2 times the expansion ratio, the density is 0.45-0.55g/cm3, and the thickness is 3.0mm-5.0mm. It is a polyethylene foam material with near perfect performance. The quality requirement of thermoforming can reach the level of ABS sheet! It does not break the foam while blowing the foam, and the thickness of the extension is uniform and easy to form! Low defect rate! No crumbs! You can directly laminate the fabric! Has good processability and thermoplasticity, non-toxic and odorless, very low VOCs! Can also be used for food packaging. Polyethylene also has excellent weather resistance and low temperature resistance, and is suitable for a wider range of outdoor or low temperature applications. It is mainly used in logistics pallets, electronic packaging pallets, food packaging pallets, luggage and other fields. The material is recyclable and does not pollute the environment during production. This is in line with the requirements of modern society for environmental protection and sustainable development, enabling you to choose a material that meets the concept of green.
-
LOWCELL polypropylene(PP) foamed folders
Folders are widely used in work.They are basically office supplies that every company will use. Many paper materials need to be archived. The floder can help classify different documents. Using folders to classify different documents can make your documents neat. It can also help you quickly find the information you need. Improve work efficiency.Folders are also various. It is usually used to store A4 size paper documents.But you can make choices according to different needs. Customize different sizes and different number of inner pages.
-
LOWCELL polypropylene(PP) foam board medicine, food, cosmetics transfer box 3 times
Lowcell is a supercritical non-crosslinked continuously extruded foamed polypropylene board with a closed-cell independent cell structure. The foaming ratio is 3 times, the density is 0.4-0.45g/cm3, and the thickness specifications are available in different thicknesses of 3-5mm. Compared with traditional solid polyethylene materials, it has many obvious advantages. First of all, the cost of the board is close to that of traditional polyethylene solid boards, and there will be no pressure to increase costs. Secondly, the high-temperature resistance of the raw material polypropylene itself can ensure that it is not easily deformed in high-temperature environments; good low-temperature resistance can also improve its strength and prevent it from becoming brittle in low-temperature environments.
We launch this transfer box made of high-quality 3 times PP foam board. It is a multi-functional transfer product suitable for pharmaceutical, food and cosmetics industries. It has excellent thermal insulation properties and compressive strength to protect products from damage during transit. Primarily designed to meet the needs of the pharmaceutical, food and cosmetics industries, it ensures the safe transit and storage of products. It has a lightweight design that is easy to carry and stack, which can save transportation and storage space. Moreover, the box adopts a drawer-type design for easy access and storage of products. This design not only reduces friction during storage of products, but also provides convenience of use.
-
LOWCELL H protective polypropylene(PP)foam board 3.0mm
Lowcell H is a carbon dioxide non-crosslinked extruded foamed polypropylene or polyethylene board with closed cell bubble structure.1.3 times of foaming ratio, density 0.6-0.67g/cm3, thickness 2-3mm. It is made by coextrusion in the cavity of the machine die head and has a three-layer structure. The upper and lower surface layers are blue or green solid polypropylene(PP) or Polyethylene(PE), and the surface is pressed with leather lines, which has the effect of anti-skid.. The middle layer is black low expanded foam, It not only has good cushioning and protection during impact, but also has high hardness and compressive performance.
-
LOWCELL H protective polypropylene(PP)foam back board
Lowcell H is a supercritical non crosslinked extruded foamed polypropylene(PP) board with closed cell and independent bubble structure. 1.3 times of foaming ratio, density 0.6-0.67g/cm3, thickness 1.0-1.2mm. It has a special three-layer structure made by coextrusion in die head cavity.The upper and lower surface layers are solid polypropylene(PP), and the surface is pressed with frosted lines, which is not easy to be scratched. The middle layer is black and low foaming, which not only takes into account the lightness, but also has high hardness and cushioning.
